Micro:Bit Slim Case

CAD Show and tell
, ,
1

Hi guys,

I’ve just published my recent Micro:Bit Slim Case project for MyMiniFactory. If you don’t now nothing about the Micro:Bit you can find some information here: https://www.microbit.co.uk/

It’s a slim and stylish protection case for this microcontroller. The idea was to create not only a case but a system, were you can add accessories to the case so you can upgrade functionalities or integrate with different kinds of projects - pocket clip, magnet clip, bike clip, battery module, etc.

You can free download them here: https://www.myminifactory.com

Hope you guys like it!

Cheers

microbit_pic_1.jpg
microbit_pic_1.jpg1024×1024 519 KB
microbit_pic_2.jpg
microbit_pic_2.jpg1024×1024 661 KB
microbit_pic_3.jpg
microbit_pic_3.jpg1024×1024 386 KB
microbit_pic_4.jpg
microbit_pic_4.jpg1024×1024 530 KB
microbit_pic_5.jpg
microbit_pic_5.jpg1024×1024 531 KB
Microbit_Instructions.jpg
Microbit_Instructions.jpg1024×1024 219 KB
Microbit_Instructions_2.jpg
Microbit_Instructions_2.jpg2048×1536 589 KB
battery_module_pic_3.jpg
battery_module_pic_3.jpg1024×1024 691 KB
battery_module_pic_4.jpg
battery_module_pic_4.jpg1024×1024 629 KB
bike_clip_pic_1.jpg
bike_clip_pic_1.jpg1024×1024 561 KB
magnet_clip_pic_4.jpg
magnet_clip_pic_4.jpg1024×1024 963 KB
pocket_clip_pic_3.jpg
pocket_clip_pic_3.jpg1024×1024 676 KB

2 Likes
2

Hey Helder,

Fantastic work! I really like your design. It’s a great looking case and the ability to extend the functionality is really clever. Thanks so much for sharing this. I’m going to print one for myself.

Cheers,

Marc

3

Hi Marc,

Thank you for the kind words. Can you please give me some feedback?

Cheers

4

What materials do I print this in?

5

Innofil3D Silver and Red PLA.

6

Thankyou for the input!

Cheers