Action figure 3D scan needed

CAD Scanning
1

I want to do a personal project and I need a vintage action figured parts scanned individually so it can be 3D printed or a mold can be 3D printed.

i have no idea how expensive is this but it’s about 16 small pieces. Who can I contact for this service?

================Update 3APR2017=================

Thank you all for your responses, as the vast majority of you asked the same questions, here are the details:

Location: Boston, MA (USA)

Project details: I’d like to get a scan that will provide a file where I can 3D print the figure at it’s size or at larger sizes)

The figure size is: 3 to 3/4"

The figure can be easily disassembled in 16 or 17 pieces, here’s the breakdown:

  1. Head (1 piece)
  2. Chest Front (1 piece)
  3. Chest Back (1 piece)
  4. Shoulder (left and right - 2 pieces)
  5. Top arm or bicep (left and right - 2 pieces)
  6. Lower arm & hand (left and right - 2 pieces)
  7. Waist (could be split in front and back - 2 pieces)
  8. Top leg exterior (left and right - 2 pieces)
  9. Top leg interior (left and right - 2 pieces)
  10. Left foot (1 piece)
  11. Right foot (1 piece)

The figure is the following:

39895.jpg
39895.jpg365×1000 124 KB

39896.jpg
39896.jpg369×1000 128 KB
39897.jpg
39897.jpg212×1000 79.3 KB
39898.jpg
39898.jpg220×1000 79.8 KB

2

Hi, let us know how big the action figures are. so to understand if our 3D scanner is ok.

Bye

Giampiero

3

please share additional details(size+color) along with pictures ( if any)

Regards

Sunny

4

Depending on how many parts it could be a lot of work. I find on my scanner the scanning is quick but post processing can take a long time.

5

www.3dinventis.it

Let me know all about your project. We can scan and 3Dprint everything (full color).

Have a nice day.

Daniele

6

Let me know all about your project. We can scan and 3Dprint it.
The scanning is quick but post processing can take a long time.

Have a nice day.

7

Scanning itself is not the most expensive part, assuming your parts are not too small or accuracy needed not to high. In that case it’s not the same range of hardware and prices may go up.

But post process each set of files to obtain a usable design is time consuming.

Also if your part are shinny / reflective or translucent, it may prevent to have a full color scan as we need to spray them to have a proper scan using some type of scanners.

Best

David

8

Hi Alex , at my Hub i offer professional service for 3 D prints and scans. If you like you can have a look to a selection of pictures regarding figures and scans. And if you submit your 3 d file i can give you a quote.

Cheers!

9

Hi,

This is Jensen from Attenborough hub’s. We offer scan and 3D printing service.

Please contact or send email to our Attenborough (https://www.3dhubs.com/service/attenborough)

Thank you and Best Regards,

Jensen

10

Hello,

I can certenly have a look at it snx can offer best price and free shipping as well .

My Hub secliways

look forward to see you there

11

I, i have a various 3d structured ligth scanners, but the problem is, where are you from? Yo vivo en Valencia, Carcaixent

12

Good morning.
I need a picture of the parts and an approximate size to be able to indicate price. A greeting.

13

hi Alex,

what is the size of the figures? just a rough measure will help us confirm which scanner is best fit for the job.

we have high precision scanners with relatively small scanning area. if the figurines can fit in then you’re most likely to be very pleased with the scanning output!

get in touch if this is of interest.

best regards,

Efrat

Precision Wax

14

Hi Alex,

We offer 3d scanning and printing services, I’d be happy to take a look and price up a quote for you.

Regards

Aaran

15

Hi Alex,

You’ll find prices and quality can vary greatly when it comes to 3D scanning and 3D printing. High quality 3D scans and prints are my top priority at YOUto3D. I’d be happy to work out a quote for you for your project over at my hub: https://www.3dhubs.com/service/YOUto3D

- Devin

16

Good morning,

Your project looks interesting.

Here at ObjectPrint, we do have a 3D scanner.

If you come with your action figure, or if you send me some pictures at first, i will do a quotation for you.

Please have a look on our website and facebook page, so you can see what we can do.

http://objectprint.com/

Best regards

Yohan

ObjectPrint

17

I can scan this for you. Could you send image’s to ben@solidmodels.Net for a quotation.

18

I have a 3d scanner a Ciclop one. You may need to do some post processing but I can make a rough point cloud for you.

19

We offer 3D scanning as a service. Let me know if you want to discuss it with us. www.dimension.works or email us at info@dimension.works

20

Hey, Im offering a service of 3D scanning on a hight resolution dental scanner in Hannover, Germany. Where are you situated? Alex